Thursday, 19 July 2012

Sea to Sky Highway Project... Cranes, Pumper trucks and Manlifts

From the Sea to Sky highway project...working to improve the road to Whistler and the 2010 Winter Olympics.
These aren't all of the pics, but it's a start.

Some of the images were supplied by my friend Joe Tompai, photographer/filmmaker ( joetompai.com )

Here is one of Joe's videos that has some great crane footage.
1190 bridge by Joe T...EagleWest Hiab truck driving by the job 
( contractor for the project )
1190 bridge by Joe T
Segment 1, south interchange



Britannia
Air-track drill and operator lowered into position by an all-terrain crane
















Segment 1, South Interchange
Bridge construction on south end of Squamish...likely an EagleWest truck...pipe-layer excavator installing something at the top of the picture
Segment 1, Larsen Creek bridge area
Concrete pump at Segment1, South Interchange
Larsen Creek bridge, Segment 1
Larsen Creek, Segment 1
Britannia Beach...old bridge/new bridge


Somewhere around the Lions Bay area, not part of the highway job






Concrete pumper set-up below the active Squamish highway
Below the highway and above the rail tracks
Bridge deck just outside of Squamish
1190 bridge by Joe T
1190 bridge by Joe T
Installing wire mesh on Cut 9, Segment 1...by Joe T
Installing mesh on Cut 9....by Joe T
North end of Cut 9...where it comes down to meet the original highway level....by Joe T
North end of Cut 9, Segment 1...by Joe T
South Interchange, Segment 1
South Interchange, Segment 1

7 comments:

  1. I am going to immediately get your blog supply to stay in touch associated with a updates.

    ReplyDelete
  2. You got a really useful blog I have been here reading for about an hour. I am a newbie and your success is very much an inspiration for me.

    ReplyDelete
  3. well thanks. I have a separate blog that details all of my massive screw-ups and epic fails...don't be fooled

    ReplyDelete
  4. Their difficult to find toughness details, however would want to enjoy a person intended for discussing the product quality information with us.

    ReplyDelete
  5. I absolutely like to learn this unique brilliant writing. Very inspiring together with enlightening too.

    ReplyDelete
  6. Your posts are encouraging me in exploring some needed information. Make sure you continue the research.

    ReplyDelete
  7. I’ll maintain examining the blog with regard to revisions with your advancement.

    ReplyDelete